The main features, applications and molding properties of the best luxury vinyl flooring

- Apr 20, 2018-

The best luxury vinyl flooring will be called low pressure HDPE, HDPE flooring, PE flooring and HDPE rods. In fact, it is also a kind of thermoplastic resin with high crystallinity and non polarity. The surface of the original HDPE is milky white, and it has a certain degree of translucency on the thin section.


The main features of the best Deluxe ethylene plate are:


The best Deluxe ethylene plate has odorless, non-toxic, feel like wax, and has excellent low temperature resistance (minimum use temperature up to -70 ~ -100 C). The chemical stability of this luxury ethylene plate is better, most acid and alkali corrosion (not resistant to oxidizing acid), insoluble in ordinary solvent under normal temperature and water absorption under normal temperature. It is small in sex and excellent in electrical insulation.


The best luxurious ethylene plate is low in density; good toughness (also suitable for low temperature conditions); good tensile; good electrical and dielectric insulation; low water absorption; low water vapor permeability; good chemical stability; tensile resistance; innoxious and harmless. The PE plate is sensitive to environmental stress (chemical and Mechanical), and the heat aging resistance is quite different. The best luxury vinyl plate does not have such defects.


The best luxury vinyl board product application:


The best luxury ethylene plate will be used in medical equipment parts, seals, cutting plates, sliding sections, widely used in chemical industry, machinery, electricity, clothing, packaging, food, environmental protection, textile and other industries. After that, it will be widely used in gas transportation, water supply, sewage, agricultural irrigation, fine particle solid transportation in mine, and fields of oil field, chemical industry and post and telecommunications, especially in gas transportation.


The best Deluxe ethylene plate's molding performance:


The best Deluxe ethylene plate products are crystal, small moisture absorption, no need to be fully dry, excellent fluidity is sensitive to pressure, high pressure injection when molding, uniform temperature, fast filling speed, full pressure protection. It is not suitable to use the direct gate to prevent the uneven shrinkage and the increase of internal stress. Attention should be paid to the selection of gate position to ensure the best product of luxury ethylene plate produced, and no shrinkage and deformation will appear.